Vivotek FD9369 - Page 285

VIVOTEK
User's Manual - 285
© 2020 VIVOTEK INC. All Right Reserved
160
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
spectrum_support <boolean> 0/7 Indicate whether to support proposed a
brightness enhancement method based
on CCM(Color Correction Matrix) model
to improve the brightness effect of the
images if the IR and blue light exists.
* Only available when
"capability_daynight_c<0~(n-1)>_suppo
rt" is 1
* We replaced this parameter with
“capability_daynight_illuminators_spect
rum_support” when the version
number (httpversion) is equal or greater
than 0312a.
spectrum_mode visible,ir,irenhanced,
blueenhanced
<product
dependent>
0/7 Indicate the spectrum mode.
"visible": The ideal default setting for
visible light.
"ir": The ideal default setting for IR
light.
"irenhanced": This CCM model
increases the brightness effect of IR
light.
"blueenhanced": This CCM model
increases the brightness effect of blue
light.
*Only available when
"capability_daynight_c<0~(n-1)>_suppo
rt" is 1 and
"capability_daynight_c<0~(n-1)>_spectr
um_support" is 1
* We replaced this parameter with
“capability_daynight_illuminators_spect
rum_mode” when the version number
(httpversion) is equal or greater than
0312a.
© 2020 VIVOTEK INC. All Right Reserved
161
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
mode auto,daynight,di,di2,
di3,di4,schedule,-
<product
dependent>
0/7 Indicate the day / night switch mode.
"auto": The Camera automatically
judges the current operation mode by
the level of ambient light detected.
"daynight": support day mode and night
mode. In day mode, the camera
streams color video. In night mode, the
camera streams black and white video
in low light environments.
"di": the camera automatically switches
the current mode when a ditigal input 1
is triggered.
"di2": the camera automatically
switches the current mode when a
ditigal input 2 is triggered.
"di3": the camera automatically
switches the current mode when a
ditigal input 3 is triggered.
"di4": the camera automatically
switches the current mode when a
ditigal input 4 is triggered.
"schedule": The Camera switches
between day mode and night mode
based on a specified schedule.
"-": not support
* We support this parameter when the
version number (httpversion) is equal or
greater than 0309d.
7.27.4 Capability for IR Illuminators
Group: capability_daynight_illuminators
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION