Vivotek FD9369 - Page 359

VIVOTEK
User's Manual - 359
© 2020 VIVOTEK INC. All Right Reserved
234
NAME VALUE SECURITY
(get/set)
DESCRIPTION
disablemdonptz <boolean> 1/4 Disable motion detection on PTZ
operation.
defaulthome <boolean> 1/4 This field tells system to use
default home position or not.
axisx capability_ptz_c<0~(
n-1)>_minpan ~
capability_ptz_c<0~(
n-1)>_maxpan
1/4 Custom home pan position.
axisy capability_ptz_c<0~(
n-1)>_mintilt ~
capability_ptz_c<0~(
n-1)>_maxtilt
1/4 Custom home tilt position.
axisz capability_ptz_c<0~(
n-1)>_minzoom ~
capability_ptz_c<0~(
n-1)>_maxzoom
1/4 Custom home zoom position.
axisf capability_ptz_c<0~(
n-1)>_minfocus ~
capability_ptz_c<0~(
n-1)>_maxfocus
1/4 Custom home focus position.
axisflip <boolean> 1/4 Custom home flip side.
returnhome <boolean> 1/4 Enable/disable return home while
idle.
returnhomeinterval 1~999 1/4 While idle over this time interval,
idle action will be taken.
digitalzoom <boolean> 1/4 Enable/disable digital zoom
idleaction_enable <boolean> 1/4 Enable/disable idle action while
idle
idleaction_type pan,patrol,tour,home
,objtrack,prev
1/4 This field tells what kind of action
should be taken while idle.
idleaction_interval 1~999 1/4 While idle over this time interval,
idle action will be taken.
zoomenhance <boolean> 1/4 Enable /disable zoom
enhancement
tour_index -1, 0~19 1/4 Index of the enabled tour group,
from 0 to 19.
© 2020 VIVOTEK INC. All Right Reserved
235
NAME VALUE SECURITY
(get/set)
DESCRIPTION
Set -1 to disable all the tour
groups.
tour_i<0~19>_name string[40] 1/4 Name of the tour.
tour_i<0~19>_type <boolean> 1/4 0 = Recorded tour
1 = Preset tour
tour_i<0~19>_speed -5 ~ 5 1/4 Preset tour: pan and tilt speed
when moving between presets.
Recorded tour: unnecessary.
tour_i<0~19>_direction forward,backward,ra
ndom
1/4 User can choose which direction
the preset tour goes.
"forward": preset tour goes in
forward order.
"backward": preset tour goes in
backward order.
"random": the presets of the tour
will be recalled randomly.
* Only available when
"capability_presettourdirection"
is 1.
* We support this parameter
when the version number
(httpversion) is equal or greater
than 0307a.
tour_i<0~19>_checklist string[512] 1/4 The indexes of preset positions,
separated by “,”
tour_i<0~19>_dwelltim
e
string[512] 1/4 Preset tour: time to wait before
moving to the next preset
position, separated by “,”
Recorded tour: number of
seconds to wait
before continuing a loop tour.
P
LEASE REFER TO PTZ CONTROL API
7.42 UART Control