Vivotek FD9369 - Page 367

VIVOTEK
User's Manual - 367
© 2020 VIVOTEK INC. All Right Reserved
242
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
encrypt none,
wep,
wpa,
wpa2
6/6 Encryption method:
none: NONE,
wep: WEP,
wpa: WPA,
wpa2: WPA2PSK
authmode OPEN, SHARED 6/6 Authentication mode.
* Only valid when "wireless_encrypt" is
"wep"
keylength 64, 128 6/6 Key length in bits.
* Only valid when "wireless_encrypt" is
"wep"
keyformat HEX, ASCII 6/6 Key1 ~ key4 presentation format.
* Only valid when "wireless_encrypt" is
"wep"
keyselect 1 ~ 4 6/6 Default key number.
* Only valid when "wireless_encrypt" is
"wep"
key1 password [26] 6/6 WEP key1 for encryption.
* Only valid when "wireless_encrypt" is
"wep"
key2 password [26] 6/6 WEP key2 for encryption.
* Only valid when "wireless_encrypt" is
"wep"
key3 password [26] 6/6 WEP key3 for encryption.
* Only valid when "wireless_encrypt" is
"wep"
key4 password [26] 6/6 WEP key4 for encryption.
* Only valid when "wireless_encrypt" is
"wep"
algorithm AES, TKIP 6/6 Algorithm
* Only valid when "wireless_encrypt" is
"wpa" or "wpa2"
presharedkey password [64] 6/6 WPA/WPA2PSK mode pre-shared key.
* Only valid when "wireless_encrypt" is
"wpa" or "wpa2"
© 2020 VIVOTEK INC. All Right Reserved
243
7.50 Shock Detection
Group: shock_c<0~(n-1)> for n channel products
n denotes the value of "capability_nvideoin" (capability_shockalarm_support > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
alarm_enable <boolean> 4/4 Enable shock detection's alarm.
alarm_level 1~100 4/4 The value indicate the support strength
level of shock detection's alarm.
7.51 Stream Profiles
Group: streamprofile_i<0~(n-1)> for n profiles product.
n denotes the value of " capability_media_streamprofiles_num"
(capability_media_streamprofiles_support = 1)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
profilename <string> 1/6 Friendly name of the profile.
token <string> 1/7 An unique identifier of the profile.
fixed <boolean> 1/7 The value indicates whether the profile
can be deleted or not.
Ex. fixed=1 indicates the profile cannot
be deleted.
occupied <boolean> 1/6 Indicates the action of creating profile.
Ex. If occupied=1 indicates the current
profile is to be created; otherwise, if
occupied=0 indicates the current
profile is to be deleted.
alwaysmulticast <boolean> 1/6 Enable always multicast.
videoconfiguration_en
able
<boolean> 1/6 To enable the selected
videoconfiguration source for this
profile.