Vivotek FD9369 - Page 424

VIVOTEK
424 - User's Manual
© 2020 VIVOTEK INC. All Right Reserved
300
* This field is required.
Example of scanning SFTP server host key:
Request:
http://<servername>/cgi-bin/admin/sftpclient.cgi?operation=getserverhostkey&address=<ip>
Response of success:
HTTP/1.1 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <Success Message Length>\r\n
\r\n
<MD5 value>
8.40.2 SFTP Server Setting
* Only available when bit 1 of "capability_protocol_ftp_server" is 1.
Syntax: (for control API)
http://<servername>/cgi-bin/admin/sftpserver.cgi?operation=<value>
PARAMETER VALUE DESCRIPTION
operation updatehostkey "updatehostkey": Re-generate host
key for SFTP server.
* It might take several seconds to
generate key, you can use
“gethostkey” after key is generated.
* This field is required.
Example of re-generate host key:
Request:
http://<servername>/cgi-bin/admin/sftpserver.cgi?operation=updatehostkey
Response of success:
HTTP/1.1 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <Success Message Length>\r\n
\r\n
ok