Vivotek FD9391-EHTV - Page 145

VIVOTEK
User's Manual - 145
To remove a recording setting from the list, select a recording name from the drop-down list and
click
Delete
.
■ Click
recording (Name)
: Opens the Recording Settings page to modify.
■ Click
ON (Status)
: The Status will become
OFF
and stop recording.
■ Click
NAS (Destination)
: Opens the le list of recordings as shown below. For more information
about folder naming rules, please refer to page 124 for details.
20180210
20180211
20180212
f you want to enable recording notication, please click
Event
to congure event triggering settings.
Please refer to
Event > Event settings
on page 117 for more details.
When completed, select
Enable this recording
. Click
Save
to enable the setting and click
Close
to exit this page. When the system begins recording, it will send the recorded les to the network
storage. The new recording name will appear in the drop-down list on the recording page as shown
below.