Vivotek IB8367-R User Manual

VIVOTEK
12 - User's Manual
Hardware Reset
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after reset, restore the factory settings and install again.
Reset: Press the recessed reset button. Wait for the Network Camera to reboot.
Restore: Press and hold the reset button until the status LED rapidly blinks. Note that all settings
will be restored to factory default. Upon successful restore, the status LED will blink green and
red during normal operation.
SD/SDHC/SDXC Card Capacity
This network camera is compliant with SD/SDHC 16GB / 8GB / 32GB / 64GB and other
preceding standard SD cards.
Reset Button

Vivotek IB8367-R Specifications

General

Brand	Vivotek
Model	IB8367-R
Category	Security Camera
Language	English