Vivotek IB8367-R User Manual

VIVOTEK
User's Manual - 57
Please follow the steps below to set up a prole:
1. Select Enable this prole.
2. Select the applicable mode: Day mode, Night
mode, or Schedule mode. Please manually enter a
range of time if you choose Schedule mode.
3. Congure Exposure control settings in the folowing
columns. Please refer to previous dicussions for
detailed information.
4. Click Save to enable the setting and click Close to
exit the page.
You can click Restore to recall the original settings without incorporating the changes. When
completed with the settings on this page, click Save to enable the settings.
If you want to congure another sensor setting for day/night/schedule mode, please click Prole to
open the Prole of exposure settings page as shown below.
Activated period:
Select the mode this profile to apply to: Day mode, Night mode, or Schedule
mode. Please manually enter a range of time if you choose Schedule mode. Then check Save to
take effect.

Vivotek IB8367-R Specifications

General

Brand	Vivotek
Model	IB8367-R
Category	Security Camera
Language	English