Vivotek IB8367 - Page 185

VIVOTEK
User's Manual - 185
53
maxframerate A list of
<Integer>
30,
30,
30,
30,
30,
30,
30
0/99 Indicate how many frame rate image
sensor outputs in current video
mode.
One to one mapping to the
resolution in "resolution".
mjpeg_ maxframerate A list of
<Positive
Integer> and
"-"
30,
30,
30,
30,
30,
30,
30
0/99 Maximum fps that the device can
encoded with MJPEG on resolutions
in current video mode.
"-" means not support.
mjpeg_maxbitrate <Positive
Integer>, -
40000000 0/99 Maximum bitrates of MJPEG.
The unit is bps.
"-" means MJPEG does not support
bit rate control.
h264_ maxframerate A list of
<Positive
Integer> and
"-"
30,
30,
30,
30,
30,
30,
30
0/99 Maximum fps that the device can
encoded with H.264 on resolutions
in current video mode.
"-" means not support.
h264_maxbitrate <Positive
Integer>
40000000 0/99 Maximum bitrates of H.264.
The unit is bps.
streamcodec <Positive
Integer>
6,6,6 0/99 Represent supported codec types of
each stream.
This contains a list of positive
integers, split by comma. Each one
stands for a stream, and the
definition is as following:
Bit 0: Support MPEG4.
Bit 1: Support MJPEG
Bit 2: Support H.264