Vivotek IP7138 - Page 105

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 105
uart_httptunnel <boolean> 0/7 Indicate whether to support the http
tunnel for uart transfer
transmission_mode Tx,
Rx,
Both
0/7 Indicate what kind of transmission mode
the machine used. TX: server, Rx:
receiver box, Both: DVR?.
network_wire <boolean> 0/7 Indicate whether to support the Ethernet
network_wireless <boolean> 0/7 Indicate whether to support the wireless
wireless_802dot11b <boolean> 0/7 Indicate whether to support the wireless
802.11b+
wireless_802dot11g <boolean> 0/7 Indicate whether to support the wireless
802.11g
wireless_encrypt_wep <boolean> 0/7 Indicate whether to support the wireless
WEP
wireless_encrypt_wpa <boolean> 0/7 Indicate whether to support the wireless
WPA
wireless_encrypt_wpa
2
<boolean> 0/7 Indicate whether to support the wireless
WPA2
wireless_beginchannel 1~14 0/7 Indicate wireless begin channel
wireless_endchannel 1~14 0/7 Indicate wireless end channel
derivative_brand <boolean> 0/7 Indicate whether to support upgrade
function for the derivative brand. For
example, if the value is true, the VVTK
product can be upgraded to VVXX.
(TCVV<->TCXX is excepted)
Group: event_customtaskfile_i<0~2>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[41] 6/6 The custom scripts identification of this entry
date string[17] 6/6 Date of custom scripts
Group: event_i<0~2>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[40] 6/6 The identification of this entry
enable 0, 1 6/6 To enable or disable this event.