Create self-signed certificate manually
1� Select this option�
2� Click Create to open a Create Certicate page, then click Save to generate the certicate.
3. The Certicate Information will automatically be displayed in the third column as shown below. You
can click Property to see the detailed information of the certicate.
4. In the rst column, check Enable HTTPS secure connection, then select a connection option: “HTTP
& HTTPS” or “HTTPS only”. Click Save to enable the settings�
5� Please refer to step 5� on last page�
Create certificate and install : Select this option if you want to create a certicate from a certicate
authority�
1� Select this option�
2� Click Create to open a Create Certicate page, then click Save to generate the certicate.
To Next Page
Loading...
