EN-9
English
5. Put the supplied silica gel into the Network Camera and tighten the lens cover. (Please
replace the silica gel with a new one if you open the lens cover after installation.)
Note
If you want to use the supplied sun sheild for outdoor environments, please follow the
steps below to install:
1. Tighten the supplied two screws.
2. Attach the supplied sun shield to the Network Camera and slide it to the desired position.
3. Fix the sun shield with supplied two screws. (Please use different screws for ceiling
mount.)
Silica gel
1
2
3
4
Ceiling mountWall mount
To Previous Page
Loading...
