Vivotek IP8152 - Page 101

VIVOTEK
User's Manual - 101
■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is is being tampered
with� To enable this function, you need to congure the Tampering Detection option rst. Please refer
to page 115 for detailed information�
14
■ Manual Trigger
This option allows users to enable event triggers manually by clicking the on/off button on the
homepage. Please congure 1 to 3 associated events before using this function.
3� Action
Dene the actions to be performed by the Network Camera when a trigger is activated.
■ Move to preset location: Tells the camera to move to a preset location. Note that this function applies
when the camera is mounted on a PTZ scanner, and has its PTZ functions set up using the Mechancial
driver conguration. See page 95 for mechanical PTZ information.
■ Backup media if the network is disconnected
Select this option to backup media le on SD card if the network is disconnected. This function will
only be displayed after you set up an Action Server, such as a network storage (NAS).