VIVOTEK
User's Manual - 91
PTZ > PTZ settings
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation�
There are two ways to enable the function:
The Digital name tag refers to the e-PTZ operation� It allows users to quickly move the
focus to a target area for close-up viewing when the current eld of view is smaller than the
camera’s maximum output frame size�
Advanced Mode
Digital PTZ Operation (E-PTZ Operation)
Select Stream: Select the stream #1 to set up the e-PTZ control. Please note that only stream #1 can
possess its own preset and patrol settings. For detailed information about how to set up preset and
patrol settings, please refer to page 91�
Auto pan/patrol speed: Select the speed from 1~5 (slow/fast) to set up the Auto pan/patrol speed control.
When completed with the e-PTZ settings, click Save to enable the settings on this page�
2012/03/10 17:08:56
x1.2
To Next Page
Loading...
