Vivotek IP8152 - Page 113

VIVOTEK
User's Manual - 113
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the dened threshold.
If you want to congure other motion detection settings for a different time period within a day, please
click Prole to open the Motion Detection Prole Settings page as shown below. A total of three motion
detection windows can be congured on this page as well.
Please follow the steps beolw to set up a prole and additional motion detectio windows in it:
1� Create a new motion detection window�
2� Check Enable this prole�
3� Select the applicable span of time in Day, Night, or the Schedule mode� Please manually enter a time
range if you choose Schedule mode�
4� Click Save to enable the settings and click Close to exit the page�
This motion detection window will also be displayed on the Event Settings page� You can go to Event
> Event settings > Trigger to configure it as a trigger source� Please refer to page 117 for detailed
information�
Percentage = 30%
Video(TCP-AV)
2010/12/10 17:08:56
corridor