Vivotek IP8152 - Page 207

VIVOTEK
User's Manual - 207
86
8.25 Remote Focus
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax: <product dependent>
http://<servername>/cgi-bin/admin/remoefocus.cgi?function=<value>[&direction=<value>]
[&position=<value>][&steps=<value>][&iris]
PARAMETER VALUE DESCRIPTION
function zoom,
focus,
auto,
scan,
stop,
positioning
Function type
zoom – Move zoom motor
focus – Move focus motor
auto – Perform auto focus
scan – Perform focus scan
stop – Stop current operation
positioning – Position the motors
direction direct,
forward,
backward
Motor’s moving direction.
It works only if function=zoom | focus.
position 0 ~ 150 if
function=zoom.
0 ~ 300 if
function=focus.
Motor’s position.
It works only if function=zoom | focus and
direction=direct.
steps 1 ~ 5 Motor’s moving steps.
It works only if function=zoom | focus and
direction=forward | backward.
iris N/A Open iris or not.
It works only if function=auto | scan.