Vivotek IP8352 - Page 131

VIVOTEK
User's Manual - 131
setting.
1 = worst quality, 5 = best quality.
100 is percentage mode.
s<0~(m-1)>_h264_qvalue 0~51 4/4 Manual video quality level input.
(s<0~(m-1)>_h264_quant = 99)
s<0~(m-1)>_h264_qpercen
t
1~100 4/4 Manual video quality level input.
(s<0~(m-1)>_h264_quant = 100)
s<0~(m-1)>_h264_bitrate 1000~160000
00
4/4 Set bit rate in bps when choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_h264_maxfra
me
1~25,
26~30 (only
for NTSC or
60Hz CMOS)
1/4 Set maximum frame rate in fps (for
h264).
s<0~(m-1)>_h264_profile
<product dependent>
0~2 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_mjpeg_quant 1~5
99, 100
4/4 Quality of JPEG video.
99 is the customized manual input
setting.
1 = worst quality, 5 = best quality.
100 is percentage mode.
s<0~(m-1)>_mjpeg_qvalue 10~200 4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant = 99)
s<0~(m-1)>_mjpeg_qperce
nt
1~100 4/4 Manual video quality level input.
(s<0~(m-1)>_mjpeg_quant = 100)
s<0~(m-1)>_mjpeg_maxfra
me
1~25,
26~30 (only
for NTSC or
60Hz CMOS)
1/4 Set maximum frame rate in fps (for
JPEG).
7.8.1.1 Alternative video input profiles per channel
In addition to the primary setting of video input, there can be alternative profile video input setting for each
channel which might be for different scene of light (daytime or nighttime).
Group: videoin_c0_profile_i<0~(m-1)> (capability. nvideoinprofile > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable/disable this profile setting
policy day, 4/4 The mode which the profile is applied to.