Vivotek IP8352 - Page 133

VIVOTEK
User's Manual - 133
schedule
daymodebegintime 00:00~23:59 6/6 Day mode begin time
daymodeendtime 00:00~23:59 6/6 Day mod end time
disableirled <boolean> 6/6 Enable/disable built-in IR LED.
enableextled <boolean> 6/6 Enable/disable External IR LED.
bwmode <boolean> 6/6 Switch to B/W in night mode if enabled
sensitivity low,
normal,
high
6/6 Sensitivity of light sensor
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE SECURITY
(get/set)
DESCRIPTION
brightness -5~5 4/4 Adjust brightness of image according to
mode settings.
saturation -5~5,100 4/4 Adjust saturation of image according to
mode settings.
100 for saturation percentage mode.
saturationpercent 0~100 4/4 Adjust saturation value of percentage
when saturation=100
contrast -5 ~ 5 4/4 Adjust contrast of image according to
mode settings.
sharpness -3~3,100 4/4 Adjust sharpness of image according to
mode settings.
100 for sharpness percentage mode.
sharpnesspercent 0~100 4/4 Adjust sharpness value of percentage
when sharpness=100
gammacurve 0,45,50,60,70,
80,90,100
4/4 Gamma curve.
lowlightmode <boolean> 4/4 Enable/disable low light mode.
profile_i0_enable <boolean> 4/4 Enable/disable this profile setting
profile_i0_policy day,
night,
schedule
4/4 The mode which the profile is applied to.
profile_i0_begintime hh:mm 4/4 Begin time of schedule mode.