Vivotek IP8352 - Page 155

VIVOTEK
User's Manual - 155
cyclesize 200~ 6/6 The maximum size for cycle recording in Kbytes
when choosing to limit recording size.
(not used in IP8362)
reserveamount 0~ 6/6 The reserved amount in Mbytes when choosing
cyclic recording mechanism.
dest cf,
0~4
6/6 The destination to store the recorded data.
“cf” means local storage (CF or SD card).
“0” means the index of the network storage.
cffolder string[128] 6/6 Folder name.
adaptive_enable
<product dependent>
0,1 6/6 Indicate whether the adaptive recording is enabled
adaptive_preevent
<product dependent>
0~9 6/6 Indicate when is the adaptive recording started
before the event trigger point (seconds)
adaptive_postevent
<product dependent>
0~10 6/6 Indicate when is the adaptive recording stopped
after the event trigger point (seconds)
7.34 HTTPS
Group: https (capability.protocol.https > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 To enable or disable secure HTTP.
policy <Boolean> 6/6 If the value is 1, it will force HTTP connection
redirect to HTTPS connection
method auto,
manual,
install
6/6 auto => Create self-signed certificate
automatically.
manual => Create self-signed certificate
manually.
install => Create certificate request and
install.
status -3 ~ 1 6/7 Specify the https status.
-3 = Certificate not installed
-2 = Invalid public key
-1 = Waiting for certificate
0 = Not installed
1 = Active
countryname string[2] 6/6 Country name in the certificate information.
stateorprovincename string[128] 6/6 State or province name in the certificate
information.