VIVOTEK
48 - User's Manual
Network: This rule allows the user to assign a network address and corresponding subnet mask to the
Allow/Deny List. The routing prex is written in CIDR notation.
For example:
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List�
Note: This rule only applies to IPv4 addresses�
For example:
Administrator IP address
Always allow the IP address to access this device: You can check this item and add the Administrator’s
IP address in this eld to make sure the Administrator can always connect to the device.
accesses from IP address 192�168�2�x will be bolcked�
To Next Page
Loading...
