Vivotek IP8361 - Page 147

VIVOTEK
User's Manual - 147
Group: event_customtaskfile_i<0~2>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[41] 6/6 Custom script identification of this entry.
date string[17] 6/6 Date of custom script.
time string[17] 6/6 Time of custom script.
Group: event_i<0~2>
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[40] 6/6 Identification of this entry.
enable 0, 1 6/6 Enable or disable this event.
priority 0, 1, 2 6/6 Indicate the priority of this event:
“0” = low priority
“1” = normal priority
“2” = high priority
delay 1~999 6/6 Delay in seconds before detecting the next event.
trigger boot,
di,
motion,
seq,
visignal,
recnotify,
tampering,
pir
6/6 Indicate the trigger condition:
“boot” = System boot
“di”= Digital input
“motion” = Video motion detection
“seq” = Periodic condition
“visignal” = Video input signal loss.
“pir” = PIR detection.
“recnotify” = Recording notification.
“audioswitch” = Audio switch.
“tampering” = Tamper detection.
“iva” = IVA trigger.
triggerstatus String[40] 6/6 The status for event trigger
di <integer> 6/6 Indicate the source id of di trigger.
This field is required when trigger condition is “di”.
One bit represents one digital input.
The LSB indicates DI 0.
vi <integer> 6/6 Indicate the source id of vi trigger.
This field is required when trigger condition is “vi”.
One bit represents one digital input.
The LSB indicates VI 0.