Vivotek IP8362 - Page 40

VIVOTEK
40 - User's Manual
3. The following information will show up in a pop-up window after clicking
Create
. Then click
Save
to
generate the certicate.
4. The Certicate Information will automatically be displayed in the third column as shown below. You
can click
Property
to see detailed information about the certicate.
5. Check
Enable HTTPS secure connection
, then select a connection option: “HTTP & HTTPS” or
“HTTPS only”. Click
Save
to enable the settings.
Create certificate and install
: Select this option if you want to create a certicate from a certicate
authority.
1. Select the third option.
2. Click
Create
to open the Create Certicate page, then click
Save
to generate the certicate.