Vivotek IP8364-C User Manual

VIVOTEK
112 - User's Manual
To remove a recording setting from the list, select a recording name from the drop-down list and
click Delete.
■ Click recording (Name): Opens the Recording Settings page to modify.
■ Click ON (Status): The Status will become OFF and stop recording.
■ Click NAS (Destination): Opens the le list of recordings as shown below. For more information
about folder naming rules, please refer to page 98 for details.
20130210
20130211
20130212
f you want to enable recording notication, please click Event to congure event triggering settings.
Please refer to Event > Event settings on page 92 for more details.
When completed, select Enable this recording. Click Save to enable the setting and click Close
to exit this page. When the system begins recording, it will send the recorded les to the network
storage. The new recording name will appear in the drop-down list on the recording page as shown
below.

Vivotek IP8364-C Specifications

General

Brand	Vivotek
Model	IP8364-C
Category	Security Camera
Language	English