Vivotek IP8364-C - Page 159

VIVOTEK
User's Manual - 159
URL Command Document for All SeriesIP8364
47
audioin_codec NULL,g711 <blank> 0/7 Available codec list for audio
input.
uart_httptunnel <boolean> 0 0/7 Indicate whether to support
HTTP tunnel for UART
transfer.
camctrl_httptunnel <boolean> 0 0/7 The attribute indicates whether
sending camera control
commands through HTTP
tunnel is supported.
0: Not supported
1: Supported
camctrl_privilege <boolean> 1 0/7 Indicate whether to support
“Manage Privilege” of PTZ
control in the Security page.
1: support both
/cgi-bin/camctrl/camctrl.cgi
and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
transmission_mode Tx Tx 0/7 Indicate transmission mode of
the machine: TX = server, Rx
= receiver box, Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to support
Ethernet.
network_wireless <boolean> 0 0/7 Indicate whether to support
wireless.
wireless_s802dot11b <boolean> 0 0/7 Indicate whether to support
wireless 802.11b+.
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to support
wireless 802.11g.
wireless_encrypt_wep <boolean> 0 0/7 Indicate whether to support
wireless WEP.
wireless_encrypt_wpa <boolean> 0 0/7 Indicate whether to support
wireless WPA.
wireless_encrypt_wpa
2
<boolean> 0 0/7 Indicate whether to support
wireless WPA2.
derivative_brand <boolean> 1 0/7 Indicate whether to support the
upgrade function for the