Vivotek IP8364-C User Manual

VIVOTEK
32 - User's Manual
Buttons Conguration
Click the Congure Buttons button, a window will prompt as shown below. Please follow the steps
below to congure your joystick buttons:
1. Select a button number from the Button # pull-down menu.
2. Select a corresponding action, such as Patrol or Preset#.
If you are not sure of the locations of each
button, use the Properties window in the Game
Controllers utility.
Tips
3. Click the Assign button to assign an
action to the button. You can delete an
association by selecting a button number,
and then click the Delete button.
Repeat the process until you are done
with the configuration of all preferred
actions.
The buttons you dene should appear on
the button list accordingly.
4. Please remember to c lick the Save
button on the Client settings page to
preserver your settings.

Vivotek IP8364-C Specifications

General

Brand	Vivotek
Model	IP8364-C
Category	Security Camera
Language	English