Vivotek MS8391-EV - Page 151

VIVOTEK
User's Manual - 151
URL Command Document for All Series391
15
updateinterval
0,
3600,
86400,
604800,
2592000
0
6/6
0 to Disable automatic time
adjustment, otherwise, it
indicates the seconds between
NTP automatic update
intervals.
restore
0,
<positive integer>
N/A
7/6
Restore the system parameters
to default values after <value>
seconds.
reset
0,
<positive integer>
N/A
7/6
Restart the server after
<value> seconds if <value> is
non-negative.
restoreexceptnet
0,
<positive integer>
N/A
7/6
Restore the system parameters
to default values except
(ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate
with other
“restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to
the default value except for a
union of the combined results.
restoreexceptdst
0,
<positive integer>
N/A
7/6
Restore the system parameters
to default values except all
daylight saving time settings.
This command can cooperate
with other
“restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to
default values except for a
union of combined results.
URL Command Document for All Series391
16
restoreexceptlang 0,
<positive integer>
N/A 7/6 Restore the system parameters
to default values except the
custom language file the user
has uploaded.
This command can cooperate
with other
“restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to
the default value except for a
union of the combined results.
restoreexceptvadp 0,
<positive integer>
N/A 99/6 Restore the system parameters
to default values except the
vadp parameters and VADP
modules that stored in the
system.
This command can cooperate
with other
“restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to
the default value except for a
union of the combined results.