Vivotek MS8391-EV - Page 155

VIVOTEK
User's Manual - 155
URL Command Document for All Series391
19
7.5 security
Group: security
NAME
VA L U E
DEFAULT
SECURITY
(get/set)
DESCRIPTION
privilege_do
view, operator,
admin
operator
1/6
Indicate which privileges
and above can control
digital output
(capability.ndo > 0)
privilege_camctrl
view, operator,
admin
view
1/6
Indicate which privileges and
above can control ePTZ
user_i0_name
string[64]
root
6/7
User name of root
user_i<1~20>_name
string[64]
<blank>
6/7
User name
user_i0_pass
password[64]
<blank>
6/6
Root password
user_i<1~20>_pass
password[64]
<blank>
7/6
User password
user_i0_privilege
admin
admin
6/7
Root privilege
user_i<1~20>_
privilege
view,
operator,
admin
<blank>
6/6
User privilege
URL Command Document for All Series391
20
7.6 network
Group: network
NAME VA L U E DEFAULT SECURITY
(get/set)
DESCRIPTION
preprocess <positive
integer>
NULL 6/6 An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP Streaming
service;
To stop service before changing its port
settings. It’s recommended to set this
parameter when change a service port to the
port occupied by another service currently.
Otherwise, the service may fail.
Stopped service will auto-start after changing
port settings.
Ex:
Change HTTP port from 80 to 5556, and
change RTP port for video from 5556 to
20480.
Then, set preprocess=9 to stop both service
first.
”/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_port=5
556& network_rtp_videoport=20480”
type lan,
pppoe
lan 6/6 Network connection type.
resetip <boolean> 1 6/6 1 => Get ipaddress, subnet, router, dns1, dns2
from DHCP server at next reboot.
0 => Use preset ipaddress, subnet, rounter,
dns1, and dns2.
ipaddress <ip address> <product
dependent>
6/6 IP address of server.
subnet <ip address> <blank> 6/6 Subnet mask.