Vivotek MS8391-EV - Page 175

VIVOTEK
User's Manual - 175
URL Command Document for All Series391
39
7.15 DDNS
Group: ddns
NAME
VA L U E
DEFAULT
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
0
6/6
Enable or disable the dynamic DNS.
provider
Safe100,
DyndnsDynamic,
DyndnsCustom,
CustomSafe100,
PeanutHull
DyndnsDy
namic
6/6
Safe100 => safe100.net
DyndnsDynamic => dyndns.org
(dynamic)
DyndnsCustom => dyndns.org
(custom)
CustomSafe100 =>
Custom server using safe100 method
PeanutHull => PeanutHull
<provider>_h
ostname
string[128]
<blank>
6/6
Your DDNS hostname.
<provider>_use
rnameemail
string[64]
<blank>
6/6
Your user name or email to login to
the DDNS service provider
<provider>_pas
swordkey
string[64]
<blank>
6/6
Your password or key to login to the
DDNS service provider.
<provider>_ser
vername
string[128]
<blank>
6/6
The server name for safe100.
(This field only exists if the provider is
customsafe100)
URL Command Document for All Series391
40
7.15.1 Express link
Group:expresslink
NAME VA L U E DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 Enable or disable express link.
state onlycheck,
onlyoffline,
checkonline,
badnetwork
badnetwork 6/6 “onlycheck” : You have to input the
host name of your camera and press
"Register" button to register it.
“onlyoffline” : Express link is active,
you can now connect to this camera at
expresslink_url.
“checkonline” : Express link is not
active.
“badnetwork” : Express Link is not
supported under this network
environment.
url string[64] <blank> 6/6 The URL to connect to this camera by
express link.
7.16 UPnP presentation
Group: upnppresentation
NAME VA L U E DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 1 6/6 Enable or disable the UPnP
presentation service.
7.17 UPnP port forwarding
Group: upnpportforwarding
NAME VA L U E DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 Enable or disable the UPnP port
forwarding service.
upnpnatstatus 0~3 0 6/7 The status of UPnP port forwarding,
used internally.
0 = OK, 1 = FAIL, 2 = no IGD router,