Vivotek MS8391-EV - Page 177

VIVOTEK
User's Manual - 177
URL Command Document for All Series391
41
3 = no need for port forwarding
7.18 System log
Group: syslog
NAME
VA L U E
DEFAULT
SECURITY
(get/set)
DESCRIPTION
enableremotelog
<boolean>
0
6/6
Enable remote log.
serverip
<IP address>
<blank>
6/6
Log server IP address.
serverport
514,
1025~65535
514
6/6
Server port used for log.
level
0~7
6
6/6
Levels used to distinguish the
importance of the information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
setparamlevel
0~2
0
6/6
Show log of parameter setting.
0: disable
1: Show log of parameter setting
set from external.
2. Show log of parameter setting
set from external and internal.
URL Command Document for All Series391
42
7.19 SNMP
Group: snmp
NAME VA L U E DEFAULT SECURITY
(get/set)
DESCRIPTION
v2 0~1 0 6/6 SNMP v2 enabled. 0 for disable, 1 for
enable
v3 0~1 0 6/6 SNMP v3 enabled. 0 for disable, 1 for
enable
secnamerw string[31] Private 6/6 Read/write security name
secnamero string[31] Public 6/6 Read only security name
authpwrw string[8~128] <blank> 6/6 Read/write authentication password
authpwro string[8~128] <blank> 6/6 Read only authentication password
authtyperw MD5,SHA MD5 6/6 Read/write authentication type
authtypero MD5,SHA MD5 6/6 Read only authentication type
encryptpwrw string[8~128] <blank> 6/6 Read/write passwrd
encryptpwro string[8~128] <blank> 6/6 Read only password
encrypttyperw DES DES 6/6 Read/write encryption type
encrypttypero DES DES 6/6 Read only encryption type
rwcommunity string[31] Private 6/6 Read/write community
rocommunity string[31] Public 6/6 Ready only community