Vivotek MS8391-EV - Page 183

VIVOTEK
User's Manual - 183
URL Command Document for All Series391
47
remotefocus
<boolean>
0
0/99
Indicate whether to
support
remote focus function.
npreset
0, <positive
integer>
20
0/99
Number of preset
locations.
protocol_https
< boolean >
1
0/99
Indicate whether to
support HTTP over SSL.
protocol_rtsp
< boolean >
1
0/99
Indicate whether to
support RTSP.
protocol_sip
<boolean>
1
0/99
Indicate whether to
support SIP.
protocol_maxconnection
<positive integer>
10
0/99
The maximum allowed
simultaneous
connections.
protocol_maxgenconnecti
on
<positive integer>
10
0/99
The maximum general
streaming connections .
protocol_maxmegaconnec
tion
<positive integer>
10
0/99
The maximum
megapixel streaming
connections.
protocol_rtp_multicast_
scalable
<boolean>
1
0/99
Indicate whether to
support scalable
multicast.
protocol_rtp_multicast_
backchannel
<boolean>
1
0/99
Indicate whether to
support backchannel
multicast.
protocol_rtp_tcp
<boolean>
1
0/99
Indicate whether to
support RTP over TCP.
protocol_rtp_http
<boolean>
1
0/99
Indicate whether to
support RTP over HTTP.
protocol_spush_mjpeg
<boolean>
1
0/99
Indicate whether to
support server push
M J P E G.
protocol_snmp
<boolean>
1
0/99
Indicate whether to
support SNMP.
protocol_ipv6
<boolean>
1
0/99
Indicate whether to
support IPv6.
protocol_pppoe
<boolean>
1
0/99
Indicate whether to
support PPPoE.
URL Command Document for All Series391
48
protocol_ieee8021x <boolean> 1
0/99
Indicate whether to
support IEEE802.1x.
protocol_qos_cos <boolean> 1
0/99
Indicate whether to
support CoS.
protocol_qos_dscp <boolean> 1
0/99
Indicate whether to
support QoS/DSCP.
protocol_ddns <boolean> 1
0/99
Indicate whether to
support DDNS.
videoin_type 0, 1, 2 2 0/99 0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_flexiblebitrate 0, 1 1 0/99 Support flexible bit
rate control or not.
videoin_codec <string> mjpeg, h264 0/99 Available codec of a
device.
The sequence is not
limited.
videoin_c0_nsensor
<positive integer> 4
0/99
Number of sensors.
videoin_
c0_alignment_default
<a list of positive
integer>
<machine
dependent>
0/99 Deault alignment
information generated
in factory.
There are totally 2n
integers (n is equal to
capability_c0_nsensor.
), the n and (n+1)
integers are the default
value of
videoin_c<0~(n-1)>_a
lignment_position.
videoin_
c0_alignment_range
< a list of positive
integer >
0,0,160,120 0/99 The range of
videoin_c<0~(n-1)>_a
lignment_position.
Take <0,0,160,120>
for example, the range
is between (0,0) and
(160,120).
videoin_c0_streamcode
c
<Positive
Integer>
6,6,6,6 0/99 This equals
"capability_videoin_c0