Vivotek MS8391-EV - Page 185

VIVOTEK
User's Manual - 185
URL Command Document for All Series391
49
_streamcodec".
videoin_c0_resolution
<a list of
available
resolution
separated by
commas>
768x144,
1280x240,
2560x480,
3200x600,
5120x960,
6400x1200,
7552x1416
0/99
Available resolutions
list.
videoin_c0_nresolution
< number of
available
resolution list>
7
0/99
How many resolution
options (listed in
"resolution") in current
video mode.
videoin_c0_maxframer
ate
<a list of
available
maximum frame
rate separated by
commas>
7,
7,
7,
7,
7,
7,
7
0/99
Available maximum
frame list.
videoin_c0_mjpeg_max
framerate
<a list of
available
maximum codec
frame rate
separated by
commas>
7,
7,
7,
7,
7,
7,
7
0/99
Available maximum
codec frame list.
videoin_c0_h264_maxf
ramerate
<a list of
available
maximum codec
frame rate
separated by
commas>
7,
7,
7,
7,
7,
7,
7
0/99
Available maximum
codec frame list.
timeshift
<boolean>
1
0/99
Indicate whether to
support time shift
caching stream.
audio_aec
<boolean>
0
0/99
Indicate whether to
support acoustic echo
cancellation.
URL Command Document for All Series391
50
audio_mic <boolean> 1
0/99
Indicate whether to
support built-in
microphone input.
audio_extmic <boolean> 1
0/99
Indicate whether to
support external
microphone input.
audio_ intmic <boolean> 0
0/99
Indicate whether to
support internal
microphone input.
audio_linein <boolean> 1
0/99
Indicate whether to
support external line
input.
(It will be replaced by
audio_mic and
audio_extmic.)
audio_lineout
<boolean> 1
0/99
Indicate whether to
support line output.
audio_headphoneout <boolean> 0
0/99
Indicate whether to
support headphone
output.
audioin_codec
<string> g711, g726
0/99
Available codec list for
audio input.
audioout_codec
<string> <blank>
0/99
Available codec list for
S IP.
uart_httptunnel <boolean> 0
0/99
Indicate whether to
support HTTP tunnel for
UART transfer.
camctrl_httptunnel <boolean> 0
0/99
The attribute indicates
whether sending camera
control commands
through HTTP tunnel is
supported.
0: Not supported
1: Supported
camctrl_privilege <boolean> 1
0/99
Indicate whether to
support “Manage
Privilege” of PTZ
control in the Security
page.