VIVOTEK
User's Manual - 191
URL Command Document for All Series391
55
10Mbps,
20Mbps,
30Mbps,
40Mbps
Group: capability_image_c<n>, where n = channel index from 0 ~ "capability_nvideoin"-1
0: Non-support WDR Enhanced
1: Support WDR Enhanced
0: Non-support WDR Pro
1: Support WDR Pro
0: Non-support 3D noise reduction
1: Support 3D noise reduction
Indicate iris type.
"piris": P-Iris
"dciris": DC-Iris
"-": No Iris control support
* Note: For some cameras, this value
may be varied depending on mounted
lens.
0: Non-support focus assistance
1: Support focus assistance
0: Non-support remote focus
1: Support remote focus
URL Command Document for All Series391
56
7.23 WebAPI: Information for a channel
Group: capability_videoin_c<n>, n = channel index from 0 to "capability_nvideoin"-1
PARAMETER VA L U E DEFAULT SECURITY
(get/set)
DESCRIPTION
nmode <Positive
Integer>
1 0/99 Indicate how many video modes
supported by this channel.
maxsize <WxH> 7552x1416 0/99 The maximum resolution of all
modes in this channel, the unit is
pixel.
mode <Integer> 0 0/99 Indicate current video mode.
nresolution <Positive
Integer>
7 0/99 How many resolution options (listed
in "resolution") in current video
mode.
resolution A list of
<WxH>
768x144,
1280x240,
2560x480,
3200x600,
5120x960,
6400x1200,
7552x1416
0/99 Resolution options in current video
mode. These options are the possible
options for
"videoin_c<n>_s<m>_resolution".
The last one is the maximum
resolution in current mode.
maxframerate A list of
<Integer>
7,
7,
7,
7,
7,
7,
7
0/99 Indicate how many frame rate image
sensor outputs in current video
mode.
One to one mapping to the
resolution in "resolution".
mjpeg_
maxframerate
A list of
<Positive
Integer> and
"-"
7,
7,
7,
7,
7,
7,
7
0/99 Maximum fps that the device can
encoded with MJPEG on resolutions
in current video mode.
"-" means not support.