Vivotek ND9322P-v2 - Page 82

VIVOTEK - Built with Reliability
82 - User's Manual
Camera position
To change a camera's position on the Liveview layout, click and drag a camera to an
unpopulated position. Note that you cannot swap the positions of two cameras by
dragging a camera onto a position already populated by the other. Also, the camera
index number on the management list is not a󰀨ected by the change of positions.
Click the Apply button for the conguration change to take e󰀨ect. The position screen
displays the current layout on the Liveview screen.
1. Wi-Fi (SSID): Displays the AP (Access Point) this camera is connected to.
2. Security mode: Displays the security mode used for the security encryption.
3. Encryption: Displays the encryption standard currently applied.