Vivotek PT3114 - Image Quality Configuration Url; Application Configuration Url

- 59 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
addpos <the position name> add preset location with its name
delpos <the position name> delete preset location with its name
selloc <index value, 0~19> add preset location into patrol list
yes enable the pan/tilt control using
remote controller
irenable
no disable the pan/tilt control using
remote controller
speedpan -5~5 change the horizontal aim-range
speedtilt -5~5 change the vertical aim-range
speedapp 1~5 change the speed of auto pan or auto
patrol.
Image Quality Configuration URL
URL: /setup/image.cgi
NAME VALUE DESCRIPTION
brightness <-5 ~ 5> adjust brightness of image
contrast <-5 ~ 5> adjust contrast of image
hue <-5 ~ 5> adjust hue of image
saturation <-5 ~ 5> adjust saturation of image
preview <not required> not save the parameters
restore <not required> recall the original settings
save <not required> save the parameters
Application Configuration URL
URL: /setup/app.cgi
NAME VALUE DESCRIPTION
emode <not required> event mode application
smode <not required> sequential mode application
smethod mail upload snapshots by email