Vivotek SD8111 - Patrol Settings

VIVOTEK
68 - User's Manual
Patrol Settings
You can select preset locations for the Network Camera to patrol.
Please follow the steps below to set up a patrol route:
1. Select preset locations from the list and click
.
2. The selected preset locations will be displayed on the Patrol Locations list.
3. Set the Dwelling time for the preset location during auto patrol.
4. Repeat step 1 and 3 to select additional preset locations.
5. If you want to delete a selected location, select it from the list and click
.
6. Select a location and click to rearrange the patrol order.
7. Adjust the Auto pan/patrol speed. (1~5 seconds)
8. Click Save to enable the settings.
2010/06/17 13:44:17
1
2
5
6
7
8
3