Vivotek SD9366-EH - Page 175

VIVOTEK
User's Manual - 175
© 2020 VIVOTEK INC. All Right Reserved
8
Version
Issue date Editor Comment
videoin_c<0~(n-1)>_minexposure,
videoin_c<0~(n-1)>_maxexposure,
videoin_c<0~(n-1)>_piris_mode,
videoin_c<0~(n-1)>_piris_position,
videoin_c<0~(n-1)>_maxgain, videoin_c<0~(n-1)>_mingain,
ircutcontrol_sensitivity, image_c<0~(n-1)>_eis_mode,
exposurewin_c<0~(n-1)>_mode,
capability_image_c<0~(n-1)>_wbmode,
eptz_c<0~(n-1)>osdzoom
capability_image_c<0~(n-1)>_privacymask_wintype,
capability_ptzenabled (Bit6/Bit8/Bit9)
2. Add these parameter:
videoin_c<0~(n-1)>_exposuremode,
videoin_c<0~(n-1)>_gainvalue,
videoin_c<0~(n-1)>_shuttervalue,
videoin_c<0~(n-1)>_zoomratiodisplay,
image_c<0~(n-1)>_eis_strength, image_c<0~(n-1)>_dis_mode,
image_c<0~(n-1)>_dis_strength, image_c<0~(n-1)>_freeze,
capability_thermal_controlmode,
capability_daynight_c<0~(n-1)>_blackwhitemode,
capability_daynight_c<0~(n-1)>_ircutsensitivity_type,
capability_daynight_c<0~(n-1)>_ircutsensitivity_supportlevel,
capability_image_c<0~(n-1)>_is_mode,
capability_image_c<0~(n-1)>_is_strength,
capability_image_c<0~(n-1)>_is_supportlevel,
capability_image_c<0~(n-1)>_is_affect,
capability_image_c<0~(n-1)>_sensortype,
capability_image_c<0~(n-1)>_exposure_modetype,
capability_image_c<0~(n-1)>_exposure_rangetype,
capability_image_c<0~(n-1)>_exposure_shuttervaluetype,
capability_image_c<0~(n-1)>_exposure_gainvaluetype,
capability_image_c<0~(n-1)>_exposure_automode_affect,
capability_image_c<0~(n-1)>_exposure_shutterprioritymode_a
ffect,
capability_image_c<0~(n-1)>_exposure_irisprioritymode_affect
,
capability_image_c<0~(n-1)>_exposure_manualmode_affect,
© 2020 VIVOTEK INC. All Right Reserved
9
Version Issue date Editor Comment
capability_image_c<0~(n-1)>_privacymask_ncolor
3. Add 3D privacy mask group
4. Add capability_smartsensor_c<0~(n-1)> group
5. Add capability_peripheral_c<0~(n-1)>
6. Add camera PTZ control group for SD series
7. Add uart control group for SD series
8. Add auto tracking group
V1.4b 2015/10/21 Kelly 1. Add camctrl/recall/preset cgi descriptions for Mechanical PTZ
products.
2. Add these parameters:
videoin_c<0~(n-1)>_s<0~(m-1)>_h264_cbr_quant,
videoin_c<0~(n-1)>_s<0~(m-1)>_h265_cbr_quant,
videoin_c<0~(n-1)>_s<0~(m-1)>_mjpeg_cbr_quant,
videoin_c<0~(n-1)>_s<0~(m-1)>_h264_cbr_qpercent,
videoin_c<0~(n-1)>_s<0~(m-1)>_h265_cbr_qpercent,
videoin_c<0~(n-1)>_s<0~(m-1)>_mjpeg_cbr_qpercent,
capability_videoin_c<0~(n-1)>_cameraunit_name,
capability_localstorage_smartsd,
capability_image_c<0~(n-1)>_autotrack_support
3. Modify the security level of
videoin_c<0~(n-1)>_zoomratiodisplay to 1/4.
4. Modify the security level of uart_i<0~(n-1)>_uartmode to 4/7.
5. Modify the description of auto tracking group.
6. Modify the best term for DGOP - Dynamic intra frame period
7. Rename xxx_dgop_xxx to xxx_dintraperiod_xxx
V1.5a 2015/11/19 Kelly 1. Delete image_c<0~(n-1)>_profile_i<0~(m-1)>_eis parameter
2. Remove capability_smartsensor_c<0~(n-1)>_iristotalrange to
capability_image_c<0~(n-1)>_smartsensor_iristotalrange
3. Add these parameters:
event_i<0~2>_action_goto_sync,
event_i<0~2>_action_autotrack_enable
V1.5b 2015/12/16 Kelly 1. Remove
capability_videoin_c<0~(n-1)>_mode<0~(m-1)>_defaultsetting
group
2. Remove smart stream v1.0 parameters
3. Add smart stream v2.0 parameters (smartstream2 group)
4. Add capability_camctrl_c<0~(n-1)> group