Vivotek SD9366-EH - Page 178

VIVOTEK
User's Manual - 178
© 2020 VIVOTEK INC. All Right Reserved
12
Version Issue date Editor Comment
4. Modify the value range description of image_c0_restoreatwb
V1.9a 2016/07/06 Kelly 1. Add these parameters:
capability_image_c<0~(n-1)>_aespeedsupportsensitivity
2. Add wireless group
3. Add wireless cgi
(connect_ap.cgi/getwirelessinfo.cgi/getwlsignalstrength.cgi/sta
rt_wps.cgi) in chapter 8.
4. Add these parameters:
capability_newtwork_dualmode,
capability_wireless_apmode_enable,
capability_wireless_apmode_ssidprefix,
capability_image_c<0~(n-1)>_exposure_qualityprioritymode_af
fect
5. Modify the description of these parameters:
videoin_c<0~(n-1)>_exposuremode,
videoin_c<0~(n-1)>_profile_i<0~(m-1)>_exposuremode
6. Remove these parameters:
capability_peripheral_c<0~(n-1)>_watersprary_support,
capability_peripheral_c<0~(n-1)>_wiper_support
7. Add camclean group and cgi (washerctrl.cgi)
V1.9b 2016/08/03 Sarah 1. Modify the description of ircutcontrol group
V1.9c 2016/08/24 Sarah 1. Add these parameters:
capability_ peripheral_c<0~(n-1)>_shockdetection_support
camctrl_preset_i<0~(capability_npreset -1)>_focussetting
2. Add shock group
3. Add the focus setting cgi in camctrl group
4. Modify the camctrl cgi for set the ptz preset with focus mode
V1.9d 2016/09/09 Sarah 1. Add these parameters:
capability_peripheral_c<0~(n-1)>_devicecontrol,
capability_peripheral_c<0~(n-1)>_heater_support,
2. Remove these parameters:
capability_thermal_support,
capability_thermal_controlmode,
capability_thermal_temperaturedetection,
capability_peripheral_c<0~(n-1)>_shockdetection_support,
3. Modify the description of these parameters:
capability_peripheral_c<0~(n-1)>_washer_support