Vivotek SD9366-EH - Page 181

VIVOTEK
User's Manual - 181
© 2020 VIVOTEK INC. All Right Reserved
14
Version
Issue date Editor Comment
V2.1b 2017/01/04 Sarah 1. Modify the description of these parameters:
audioin_c0_aec_enable,
capability_image_c<0~(n-1)>_exposure_hlcmode_supportwind
ow,
capability_image_c<0~(n-1)>_exposure_hlcmode_affect,
event_i<0~2>_action_goto_sync,
ircutcontrol_bwmode
2. Remove these parameters:
event_i<0~2>_action_cutsom<0~2>_enable,
event_i<0~2>_action_cutsom<0~2>_name,
3. Rename aec parameter:
capability_audio_aecswitch -> capability_audio_aecmode
4. Add these parameters:
capability_audio_aecaffect
V2.1c 2017/01/18 Kelly 1. Fix typo: aecaffect -> audio_aecaffect
V2.2a 2017/02/07 Kelly 1. Modify the description of these parameters:
capability_videoout_codec,
event_i<0~2>_di,
capability_ptzenabled
2. Add these parameters:
capability_image_c<0~(n-1)>_dnrstrength,
capability_shockalarm_support,
capability_presettourdirection,
capability_daynight_c<0~(n-1)>_optimizedir,
camctrl_c0_tour_i<0~19>_direction
V2.2b 2017/03/16 Kelly 1. Remove the unused baudrate: 110,3600,7200 in uart group.
2. Modify the description of these parameters:
capability_image_c<0~(n-1)>_exposure_hlcmode_affect
3. Remove these parameters:
capability_peripheral_c<0~(n-1)>_washer_support,
capability_peripheral_c<0~(n-1)>_washer_mode,
capability_peripheral_c<0~(n-1)>_heater_support
4. Add these parameters for IZ camera:
camctrl_c<0~(n-1)>_returnhome,
camctrl_c<0~(n-1)>_returnhomeinterval,
camctrl_c<0~(n-1)>_idleaction_enable,
camctrl_c<0~(n-1)>_idleaction_type,
© 2020 VIVOTEK INC. All Right Reserved
15
Version Issue date Editor Comment
camctrl_c<0~(n-1)>_idleaction_interval
V2.2c 2017/04/27 Kelly 1. Modify the description of these parameters:
capability_camctrl_c<0~(n-1)>_focusmode
V2.3a 2017/06/01 Kelly 1. Add these parameters:
capability_videoin_c<0~(n-1)>_cmosfreq_support,
image_c<0~(n-1)>_xoffset,
image_c<0~(n-1)>_yoffset,
capability_image_c<0~(n-1)>_deinterlace_support,
capability_image_c<0~(n-1)>_deinterlace_mode,
image_c<0~(n-1)>_deinterlace_enable,
image_c<0~(n-1)>_deinterlace_mode,
capability_image_c<0~(n-1)>_dnrtype,
status_c<0~(n-1)>_signal_detect,
status_c<0~(n-1)>_signal_type,
videoin_c<0~(n-1)>_s<0~(m-1)>_ratiocorrect
2. Modify the description of these parameters:
capability_supporttriggertypes,
capability_image_c<0~(n-1)>_basicsetting,
capability_image_c<0~(n-1)>_exposure_modetype,
capability_image_c<0~(n-1)>_exposure_shuttervaluetype,
capability_image_c<0~(n-1)>_exposure_gainvaluetype,
capability_image_c<0~(n-1)>_exposure_levelrange,
capability_image_c<0~(n-1)>_exposure_winmode,
capability_image_c<0~(n-1)>_exposure_windomain,
capability_image_c<0~(n-1)>_exposure_wintype,
capability_image_c<0~(n-1)>_exposure_winnum,
capability_image_c<0~(n-1)>_exposure_ntsc_totalrange,
capability_image_c<0~(n-1)>_exposure_pal_totalrange,
capability_image_c<0~(n-1)>_exposure_maxrange,
capability_image_c<0~(n-1)>_exposure_minrange,
capability_image_c<0~(n-1)>_exposure_rangetype,
capability_image_c<0~(n-1)>_exposure_hlcmode_affect,
capability_image_c<0~(n-1)>_exposure_hlcmode_supportwind
ow,
capability_localstorage_smartsd,
capability_localstorage_manageable,
capability_localstorage_seamless,