Vivotek SD9366-EH - Page 185

VIVOTEK
User's Manual - 185
© 2020 VIVOTEK INC. All Right Reserved
18
Version
Issue date Editor Comment
2. Remove these parameters:
capability_image_c<0~(n-1)>_scenemode_visibility_affect,
capability_image_c<0~(n-1)>_scenemode_noiseless_affect,
capability_image_c<0~(n-1)>_scenemode_lpcparkinglot_affect
,
capability_image_c<0~(n-1)>_scenemode_lpcstree_affect,
image_c<0~(n-1)>_scene_enable,
image_c<0~(n-1)>_profile_i0_scene_enable,
image_c<0~(n-1)>_profile_i0_scene_mode
3. Add these parameters for WebAPI version 0309d:
capability_daynight_c<0~(n-1)>_mode,
capability_daynight_c<0~(n-1)>_builtinwled,
capability_image_c<0~(n-1)>_lens_ldc_support,
image_c<0~(n-1)>_lens_ldc_mode
4. Replace "capability_whitelight" with
"capability_daynight_c<n>_builtinwled"
5. Modify the security level of system_info_serialnumber
V2.5b 2018/03/26 Kelly 1. Modify the security level of system_info_serialnumber
2. Modify the description of these parameters:
image_c<0~(n-1)>_lens_ldc_mode,
capability_daynight_c<0~(n-1)>_builtinwled,
capability_smartstream_version
3. Modify the value type of these parameters:
capability_daynight_c<0~(n-1)>_mode,
capability_motion_wintype,
camctrl_c<0~(n-1)>_idleaction_type,
capability_videoin_c<0~(n-1)>_lens_type,
ircutcontrol_sensitivity
V2.6a 2018/05/23 Kelly 1. Modify the description of these parameters:
videoin_c<0~(n-1)>_s<0~(m-1)>_mjpeg_cbr_quant,
ircutcontrol_disableirled,
videoin_c<0~(n-1)>_profile_i<0~(m-1)>_exposurelevel,
videoin_c<0~(n-1)>_profile_i<0~(m-1)>_exposuremode,
videoin_color,
videoin_c0_color
2. Add these parameters for WebAPI version 0310a:
capability_image_c<0~(n-1)>_exposure_bracketing_mode,
© 2020 VIVOTEK INC. All Right Reserved
19
Version Issue date Editor Comment
capability_image_c<0~(n-1)>_exposure_bracketing_range,
videoin_c<0~(n-1)>_bracketing_level,
capability_image_c<0~(n-1)>_palette_support,
capability_image_c<0~(n-1)>_palette_mode,
image_c<0~(n-1)>_palette_mode,
capability_videoin_c<0~(n-1)>_color_support,
capability_videoin_c<0~(n-1)>_eptz_zoomratio
3. Add thermalsensor type in
capabiltiy_image_c<0~(n-1)>_sensortype
4. Remove the [&update=<value>] parameter
V2.7a 2018/09/11 Kelly 1. Modify security level of image_c<0~(n-1)>_palette_mode
2. Modify the description of these parameters:
event_i<0~2>_trigger
3. Modify the value type of these parameters:
capability_image_c<0~(n-1)>_wbmode,
videoin_c<0~(n-1)>_whitebalance,
videoin_c<0~(n-1)>_profile_i0_whitebalance
4. Add these parameters for WebAPI version 0311a:
capability_daynight_c<0~(n-1)>_spectrum_support,
capability_daynight_c<0~(n-1)>_spectrum_mode,
ircutcontrol_spectrum_mode,
capability_image_c<0~(n-1)>_exposure_meteringmode,
videoin_c<0~(n-1)>_meteringmode,
videoin_c<0~(n-1)>_profile_i0_meteringmode,
capability_image_c<0~(n-1)>_hlm,
image_c<0~(n-1)>_hlm,
image_c<0~(n-1)>_profile_i0_hlm
5. Add auto and deblur mode in
capabilitiy_image_c<0~(n-1)>_scenemode_supporttype
6. Add center mode in
capabilitiy_image_c<0~(n-1)>_exposure_winmode
V2.7b 2018/11/12 Sarah 1. Add lpcfreeway mode in
capabilitiy_image_c<0~(n-1)>_scenemode_supporttype
2. Modify these parameters for WebAPI version 0311b:
ddns_provider
3. Remove these parameters for WebAPI version 0311b:
ddns_<provider>_severname