Vivotek SD9366-EH - Page 188

VIVOTEK
User's Manual - 188
© 2020 VIVOTEK INC. All Right Reserved
22
Version Issue date Editor Comment
accessname,
ircutcontrol group,
seamlessrecording group,
3. Remove these parameters for WebAPI version 0312a:
autocleanup group,
recording_i<0~(n-1)>_limitsize,
recording_i<0~(n-1)>_cyclic,
recording_i<0~(n-1)>_cyclesize,
recording_i<0~(n-1)>_reserveamount
4. Add these parameters for WebAPI version 0312a:
capability_storage_management group,
disk_i<0~(n-1)>_autocleanup_mode,
disk_i<0~(n-1)>_cyclic_reserve,
disk_i<0~(n-1)>_type,
recording_i<0~(n-1)>_foldername,
event_i<0~(n-1)>_foldername,
timeshift_c<0~(n-1)>_enable,
capability_daynight_illuminator group,
ircutcontrol_c<0~(n-1) group,
ircutcontrol_illuminators group,
seamlessrecording_c<0~(n-1)> group,
network_service_bonjour group
5. Remove description of nonexisted parameters of
capability_peripheral group
6. Remove syslog.cgi
2.9b 2019/09/09 Grace 1. Add descriptions for network_bonjour and
seamlessrecording_c<0~(n-1)> group
2.
Modify descriptions for
capability_image_c<0~(n-1)>_wdrpro_affect,
capability_image_c<-~(n-1)>_wdrc_affect,
capability_image_c<0~(n-1)>_is_affect,
capability_image_c<0~(n-1)>_exposure_automode_affect,
capability_image_c<0~(n-1)>_exposure_shutterprioritymode_a
ffect,
capability_image_c<0~(n-1)>_exposure_irisprioritymode_affec
t,
capability_image_c<0~(n-1)>_exposure_qualityprioritymode_a