Vivotek SD9366-EH - Page 259

VIVOTEK
User's Manual - 259
© 2020 VIVOTEK INC. All Right Reserved
92
NAME VALUE SECURITY
(get/set)
DESCRIPTION
use this> dtime” when the version number
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
disableirled
<Not
recommended to
use this>
<boolean> 6/6 Enable/disable built-in IR led
* Only available when "
capability_daynight_c<0~"capability_
nvideoin"-1>_builtinir > 0".
* We replace this parameter with
"ircutcontrol_illuminators_builtin_irle
d_enabled" when the version number
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
enableextled
<Not
recommended to
use this>
<boolean> 1/6 Enable/disable external IR led
* Only available when
"capability_daynight_c<0~"capability_
nvideoin"-1>_externalir > 0".
* We replace this parameter with
"ircutcontrol_illuminators_external_d
o_enabled" when the version number
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
© 2020 VIVOTEK INC. All Right Reserved
93
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enablewled
<Not
recommended to
use this>
<boolean> 6/6 Enable/disable built-in White led
* Only available when "
capability_daynight_c<0~"capability_
nvideoin"-1>_builtinwled > 0".
* We replace this parameter with
"ircutcontrol_illuminators_builtin_whi
teled_enabled" when the version
number (httpversion) is equal or
greater than 0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
bwmode
<Not
recommended to
use this>
<boolean> 6/6 Switch to B/W in night mode if
enabled.
* Only available when
"capability_daynight_c<0~(n-1)>_
blackwhitemode" is 1.
* We replace this parameter with
“ircutcontrol_c<0~(n-1)>_bwmode”
when the version number
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
sensitivity
<Not
recommended to
use this>
low,normal,high,1~10
0
6/6 Sensitivity of day/night control.
There are two value format:
"low,normal,high": if
capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type=options
"1~100": if
capability_daynight_c<0~(n-1)>_ircuts