Vivotek SD9366-EH - Page 262

VIVOTEK
User's Manual - 262
© 2020 VIVOTEK INC. All Right Reserved
96
There are two value format:
"low,normal,high": if
capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type=options
"1~100": if
capability_daynight_c<0~(n-1)>_ircuts
ensitivity_type=normalize
* Only available when
"capability_daynight_c<0~(n-1)>
_ircutsensitivity_type" is not "-".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
7.10.2 IR cut control Illuminators
Group: ircutcontrol_illuminators (capability_daynight_c<0~(n-1)>_support > 0)
n denotes the value of "capability_nvideoin"
NAME VALUE SECURIT
Y
(get/set)
DESCRIPTION
builtin_irled_enabled <boolean> 6/6 Enable/disable built-in IR led
* Only available when
"capability_daynight_illuminators_buil
tin_support > 0" and "irled" is listed in
"capability_daynight_ illuminators
_builtin_type"
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
builtin_whiteled_enable
d
<boolean> 6/6 Enable/disable built-in white led
* Only available when
"capability_daynight_illuminators_buil
tin_support > 0" and "whiteled" is
listed in "capability_daynight_
illuminators _builtin_type"