Vivotek SD9366-EH - Page 384

VIVOTEK
User's Manual - 384
© 2020 VIVOTEK INC. All Right Reserved
218
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
autocleanup_mode targetbase,
sourcebase
6/6 Specify the automatic clean up method
for storage devices, where “targetbase”
indicate the automatic clean up is based
on the attached devices such as nas or sd
card, whereas “sourcebase” indicate
automatic clean up is based on the
selected recording track.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
autocleanup_enabled
<Not recommended to
use this>
<boolean> 6/6 Enable automatic clean up method.
Expired and not locked media files will be
deleted.
* For forward compatibility reservations,
but only group disk_i0_autocleanup is
effective.
* Not recommended to use this. Please
refers "autocleanup" group.
* This parameter will not be used after
the version number (httpversion) is equal
or greater than 0400a.
autocleanup_maxage
<Not recommended to
use this>
<positive integer> 6/6 To specify the expired days for automatic
clean up.
* For forward compatibility reservations,
but only group disk_i0_autocleanup is
effective.
* Not recommended to use this. Please
refers "autocleanup" group.
* This parameter will not be used after
the version number (h
ttpversion) is equal
or greater than 0400a.