Vivotek SD9366-EH - Page 467

VIVOTEK
User's Manual - 467
© 2020 VIVOTEK INC. All Right Reserved
300
* This field is required.
Example of scanning SFTP server host key:
Request:
http://<servername>/cgi-bin/admin/sftpclient.cgi?operation=getserverhostkey&address=<ip>
Response of success:
HTTP/1.1 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <Success Message Length>\r\n
\r\n
<MD5 value>
8.40.2 SFTP Server Setting
* Only available when bit 1 of "capability_protocol_ftp_server" is 1.
Syntax: (for control API)
http://<servername>/cgi-bin/admin/sftpserver.cgi?operation=<value>
PARAMETER VALUE DESCRIPTION
operation updatehostkey "updatehostkey": Re-generate host
key for SFTP server.
* It might take several seconds to
generate key, you can use
“gethostkey” after key is generated.
* This field is required.
Example of re-generate host key:
Request:
http://<servername>/cgi-bin/admin/sftpserver.cgi?operation=updatehostkey
Response of success:
HTTP/1.1 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <Success Message Length>\r\n
\r\n
ok
© 2020 VIVOTEK INC. All Right Reserved
301
Syntax: (for query API)
http://<servername>/cgi-bin/admin/sftpserver.cgi?operation=<value>
PARAMETER VALUE DESCRIPTION
operation gethostkey "gethostkey": Get host key for
SFTP server.
* This field is required.
* If “updatehostkey” is not yet
finished, you will receive error
message.
Example of get host key:
Request:
http://<servername>/cgi-bin/admin/sftpserver.cgi?operation=gethostkey
Response of success
HTTP/1.1 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <Success Message Length>\r\n
\r\n
MD5:a5:8a:7d:e2:2a:f8:c9:a0:ee:93:93:b8:0a:7a:18:97 (RSA)
MD5:7a:f4:07:48:e3:70:d5:89:15:36:6f:d5:25:f2:7e:0d (ED25519)
<End of document>