Vivotek VS8801 - Page 133

VIVOTEK
User's Manual - 133
34
URL Command Document for VS8401-VVTK
campatibility, and we
recommend changing to use
“s<0~(m-1)>_h264_qpercen
t”.
s<0~(m-1)>_h264_qpercent 1~100 45 4/4 Set quality by percentage.
1: Worst quality
100: Best quality
(s<0~(m-1)>_h264_quant =
100)
s<0~(m-1)>_h264_bitrate 1000~4000000 512000 4/4 Set bit rate in bps when
choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_h264_maxframe 1~30 20 1/4 Set maximum frame rate in
fps (for h264).
s<0~(m-1)>_h264_profile 0~2 1 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_mjpeg_quant 0 ~ 5,99, 100 3 4/4 Quality of JPEG video.
0, 99 and 100 is the
customized manual input
setting.
1 = worst quality, 5 = best
quality.
s<0~(m-1)>_mjpeg_qvalue 0~200 50 4/4 Manual video quality level
input.
(s<0~(m-1)>_mjpeg_quant =
0, 99)
*Note: This is reserved for
campatibility, we
recommend changing to use
“s<0~(m-1)>_mjpeg_qperce
nt”.
s<0~(m-1)>_mjpeg_qpercent 1~100 49 4/4 Set quality by percentage.
1: Worst quality
100: Best quality
(s<0~(m-1)>_mjpeg_quant =
100)
s<0~(m-1)>_mjpeg_maxfram 1~30 20 1/4 Set maximum frame rate in