VIVOTEK
152 - User's Manual
53
URL Command Document for VS8401-VVTK
tampering 0 ~ 255 0 6/6 Indicate the source of the tampering
detection. Each bit represents one
channel, and the LSB indicates
channel 1.
visignal 0 ~ 255 0 6/6 Indicate the source of video input
signal loss. Each bit represents one
channel, and the LSB indicates
channel 1.
virestore 0 ~ 255 0 6/6 Indicate the source of video input
signal restore. Each bit represents one
channel, and the LSB indicates
channel 1.
mdwin <integer> 0 6/6 Indicate the source window id of
motion detection.
This field is required when trigger
condition is “md”.
One bit represents one window.
The LSB indicates the 1
st
window.
For example, to detect the 1
st
and 3
rd
windows, set mdwin as 5.
inter 1~999 1 6/6 Interval of snapshots in minutes.
This field is used when trigger
condition is “seq”.
weekday 0~127 127 6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on
Friday and Sunday, set weekday as
66.
begintime hh:mm 00:00 6/6 Begin time of the weekly schedule.
endtime hh:mm 24:00 6/6 End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as
always on)
To Next Page
Loading...
