Vivotek VS8801 - Page 79

VIVOTEK
User's Manual - 79
Event settings
In the Event settings column, click Add to open the Event settings page. On this page, you can
arrange three elements -- Trigger, Schedule, and Action to set an event. A total of 3 event settings can be
congured.
Event name: Enter a name for the event setting.
Enable this event: Select this option to enable the event setting.
Priority: Select the relative importance of this event (High, Normal, or Low). Events with a higher priority
setting will be executed rst.
Detect next event after
seconds: Enter the duration in seconds to pause motion detection after a
motion is detected.
An event is an action initiated by a user-defined trigger source; it is the causal arrangement of the
following three elements: Trigger, Event Schedule, and Action.
Trigger
This is the cause or stimulus which denes when to trigger the video server. The trigger source can be
congured to use the video server’s built-in motion detection mechanism or external digital input devices.
There are several choices of trigger sources as shown below.
Select the item to display the detailed
conguration options.