Vivreau VI TAP - Advanced Dispensing and Maintenance; Sparkling and Hot Water Dispensing; Optimal Cleaning Instructions; CO2 System Management

Chilled Sparkling Water
Press and Hold the Green Button to dispense water.
Releasethebuttonwhenlled.
Hot Water (if supplied)
As a safety feature, to dispense Hot Water, Touch and Release either Red
Button, then Press and Hold the opposite side Red Button within 3 seconds.
Releasethebuttonwhenlled.
WARNING Water is Hot! Do not place hands or other body parts beneath
Dispensing Head when dispensing hot water.
B
IMPORTANT _________________________
Ensure the Vi Tap Dispensing System and surrounding areas are kept
clean and sanitary at all times.
OPTIMAL CLEANING INSTRUCTIONS
•Remove Dispensing Nozzle and place in a container of Sanitizing Solution.
•Leave Nozzle in Sanitizing Solution for a minimum of 4 hours.
•Ensure protective gloves are worn when in contact with Sanitizing Solution.
•Wipe Dispensing Head, Drip Tray and countertop surface with anti-bacterial
wipes and sanitizing spray.
•WrapDispensingHeadwithplasticlm.
•ToreturntheDispensingHeadSystemtoservice,removetheplasticlm,
rinse Nozzle and install in Dispensing Head.
CO2
•TheCO2 canister can be located inside the front of the system or
outside the system in a remote location.
•Regardlessoflocationthetankisttedwitharegulatorthathasbeen 
preset. For proper operation the regulator should never be adjusted by
the user.
•TochangetheCO2 loosen the connection to the tank with the provided
wrench and remove the regulator from the tank.
•Theregulatorshouldbehandtightenedtothenewtankandthen 
tightened snug with the provided wrench. Never over tighten.
•TheCO2 tank must always be secured to prevent it from falling.
•PleaserefertoyourlocalCO2 supplier for complete handling and
safety instructions.