Vivreau VI TAP - Vi Tap Cleaning Procedures; General Cleaning Recommendations; Nozzle Cleaning and Removal

VI TAP CLEANING
INSTRUCTIONS
Your Vi Tap should be cleaned regularily.
Vivreau recommend that you use disinfectant spray for the
cleaning of your Vi tap.
Ifyourtapbecomessoiledwithcoee,tea,milketc.cleanwith
hot soapy water using a non abrasive cloth.
Do not forget to clean the drip tray lid and inside the drip tray
using either disinfectant spray or hot soap water and non
abrasive cloth.
Keep surrounding area around the machine clean and sanitized.
Vi Tap equipment in the cupboard area below should be kept free
of dust; the ventilation should not be obstructed allowing free
airowaroundtheequipment.
Vi Tap nozzles should be removed regularily and cleaned with hot
soapy water using a non abrasive cloth.
After completing each clean dispense hot water for at least 10
secondstoushthroughthenozzle.
DO NOT use any abrasive material on your VIVREAU machine.
If in doubt, please contact VIVREAU at 877-999-1044
STEP ONE: Use drip tray to
unscrew nozzle. Ensure arrows
line up before unscrewing.
REMOVING THE VI TAP NOZZLE
FOR CLEANING
STEP TWO: Remove nozzle
G