Vizio D39hn-E0 User Manual

English - 21
How do I return to the Setup App?
• The on-screen menu has guided setup. Press MENU, then select Guided Setup. Select the type of setup you need
and press OK. The Setup App will begin.
• To reset the TV to factory defaults, press MENU > System > Reset & Admin > Reset TV to Factory Defaults. If
you have changed the default Parental Control Passcode, enter it now. Select Reset. Remember that all of your
settings will be lost.
There is a picture, but there is no sound.
• Press the VOLUME UP button on the remote. The TV will turn on.
• Press the MUTE button on the remote to ensure that mute is o.
• Press MENU > Audio. The TV Speakers should be set to On.
• If you have an audio device connected to your TV, press MENU > Audio and set Volume Control to External. Use
your audio device’s remote to control the volume.
The TV displays ‘No Signal’.
• Be sure your connected devices are turned on.
• Press the INPUT button on the remote and select the input to which your device is connected to. (e.g HDMI-1,
HDMI-2, COMP, etc.)
There are black/gray bars on the top/bottom/sides of the screen.
• Some TV channels add black bars to the picture, this is normal.
• Set the TV to Wide or Zoom mode. Press the WIDE button, highlight Wide or Zoom, and press OK.
• Adjust the video settings of your external device. See your device’s user manual for more information.
Help Topics

Vizio D39hn-E0 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	38.5 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Full-Array
Supported video modes	720p
Contrast ratio (dynamic)	200000:1
Display number of colors	16.78 million colors
Motion interpolation technology	-
Number of OSD languages	3
On Screen Display (OSD)	Yes
On Screen Display (OSD) languages	ENG, ESP, FRE
3D	No
Audio decoders	DTS, DTS TruSurround
RMS rated power	20 W
Number of speakers	2
Composite video in	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Remote control type	XRT020
Sustainability certificates	ENERGY STAR
Power consumption (standby)	0.5 W
Power consumption (typical)	29 W
Product color	Black
Panel mounting interface	100 x 100 mm
Package depth	127 mm
Package width	975 mm
Package height	615 mm
Package weight	9198 g

Weight and Dimensions

Depth (with stand)	210 mm
Width (with stand)	882 mm
Height (with stand)	576 mm
Weight (with stand)	6400 g
Depth (without stand)	74 mm
Height (without stand)	520 mm
Weight (without stand)	6200 g