2Completing The First-Time Setup
The rst time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use:
Before you begin the rst-time setup:
• Your Television should be installed and the power cord should be connected to an electrical outlet.
• If you have a wireless network, have the network password ready.
• If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the Television.
1. Choose your language. 2. Choose home use. 3. Choose your country. 4. Choose your Wi-Fi and enter the password.
5. Name your TV. 6. Scan for channels 7. Accept the T&Cs and register your device. All set!
11
To Next Page
Loading...
Need help?
General
